Descripción
The FLUM VALVES plastic valve is a single-chamber, spring-loaded hydraulic diaphragm valve with a basic opening and closing operation due to the pressure exerted by the water in the pipe.
The simplicity of its design, construction and operation allow the valve to have a wide variety of applications in different types of water distribution systems. Performing various functions depending on whether it is equipped with:
- Manual opening and closing valve.
- Solenoid valve
- pressure regulator
- pressure sustaining
- Flow limiter etc.
Available sizes from DN 25 – 1″ to DN 80-3″
SPECS:
Materials
- Body and cover: Nylon reinforced with fiberglass Nylon 6.6 + Fiberglass.
- Spring: Stainless steel
- Membrane: Natural rubber reinforced with nylon fabric.
Utilities
- agricultural irrigation
- Greenhouses
- Gardens
- Industrial processes
Advantage:
- Easy maintenance and installation.
- The membrane can be changed by removing the top cover without the need to remove the valve from the pipeline.
- Slow opening and closing, avoiding water hammer.
- Low load loss.
