PILOT REDUCER/HOLDER HIGH PERFORMANCE PLASTIC (EN)

High performance plastic light, increases performance by 10% compared to a standard light. Faster and more sensitive. Available with springs in PN4, PN6 and PN10.

  • Working range 1-10 bar (14.5-145psi), medium pressure, gray colour.
  • Working range 0.8 – 6 bar (11.6-87psi), medium pressure, red color.
  • Working range 0.3 – 4 bar (4.35-65psi), medium pressure, green colour.
Categorías: ,

Descripción

APPLICATIONS:

This metal pilot has been designed so that it can work at high pressures when assembled with a hydraulic valve, be it reducing or sustaining pressure, and increases performance by 10% compared to a standard pilot.

SPECS:

Materials

  • Body: Plastic with fiberglass.
  • Spring: Stainless steel
  • Membrane: Natural rubber
  • Screw and nut: Stainless steel
  • Shaft: Nickel plated brass

Functioning:

To regulate the pressure, the upper screw of the pilot is used. Tightening the screw will increase the balance pressure and loosening it will decrease it. The screw will be turned little by little so that the pressure stabilizes.

Upon reaching the desired pressure, the position of the screw will be fixed by means of the nut.

Instalation and maintenance

For a correct operation of the pilot, it is recommended to respect the assembly diagrams, using the appropriate fittings for the type of thread.

Seal the connectors with liquid Teflon or tape. Both the installation and the manipulation of the pilot will be carried out with adequate tools and by qualified personnel.

Productos relacionados