AVAB DOUBLE CAMERA 3 EFFECTS (EN)

The new HR FLUM VALVES cast iron hydraulic suction cup, with three effects, has a basic opening and closing operation due to the pressure exerted by the existing water.

Descripción

HR air valves are used to prevent explosion in the pipeline, as a result of air charge/discharge failure at system startup and shutdown; and during the operation. These valves consist of a body that contains two floats in different chambers that are placed at a predetermined height.

The main float is guided by a grooved box and moves when there is a change in water elevation. As a result of the valve’s streamlined design, the float remains completely stable under air intake/discharge, preventing premature closure.

Only when there is an increase in the water level, the float rises and closes the valve; and when the water level drops, the float lowers, allowing large volumes of air to enter the system. The second float is attached via a pin for quick reaction. So you can let the air out while the system is running.

STANDARD

  • Design according to EN 1074/4 AND AWWA C512
  • Pressure test according to EN12266
  • Flanges according to EN1092-2
  • Ductile iron according to EN1563

MAIN APPLICATIONS

  • Distribution networks.
  • Irrigation systems.
  • Feed pipes.
  • Changes in slope on ascending sections and high points of pipes.

FUNCTIONING:

Output of large airflows
During the filling of the main pipe it is necessary to release an air flow equivalent to the inlet water flow. Thanks to its aerodynamic shape of the body and the deflector, it avoids its early closure during this process, thus helping a total discharge of the pipe.

air purge
When the pipe fills completely, the main float makes the closing. Meanwhile, the second buoy-type float can remain open to release any remaining air pockets in the pipe.
When all the air has left the system, this second float rises due to the push exerted by the water and closes the valve that this chamber incorporates.

Admission of large air flows
During the emptying of the pipe, either by necessity or due to breakage, it is necessary to introduce an air flow to the pipe, similar to that of the water that is being emptied. In this way depression conditions and damage to the network are avoided.
SUCTION CUP 3 EFFECTS VS